skip to Main Content

Metering Batch Feeders

Vibratory Metering Batch Feeders Model CFL-MF-48242-77-8-2

Material: ASR and Non-Ferrous Metals
Bulk Density: 19-38 Lbs./Ft.3
Rate: 45 TPH at 50 downslope

Metering Batch Feeders are ideal for any application where materials need to be conveyed with an even flow of distribution. Materials are placed in a feeder with 5-20 cubic yard capacity and are then evenly distributed on the conveyer. Variable speed control allows for the consistent flow of material to meet your bulk processing and conveying requirements.

  • Loading Hopper:
    • Approximately 16 cubic yard capacity
    • Includes a 44.5″ hexagon rotating drum which for assisting in leveling, anti-bridging and metering of material in the feeder pan
    • Automatic screw jack for adjusting metering height included
    • Motor and gear-box provided
    • Drum support frame is adjustable to position drum properly above the feeder
  • Tray Size:
    • 48” wide by 242” long
  • Drive:
    • Dual Model KEE-77-8 Rotary Electric Vibratory Motors
    • TENV design with fully adjustable eccentric weights
    • 900 RPM fixed, 6 HP each, 12 HP total.
  • Power Requirements:
    • 460 Volt, 3 Phase, 60 Hz
  • Feeder Isolation:
    • Marshmallow Mount isolation
    • Support base provided by BPS
    • Approximate discharge elevation: 57”
  • System Controls
    • Quoted as an option
  • Materials of Construction:
    • Mild steel
  • Finish Paint:
    • Blue enamel

Option I

System Controls

  • A/C inverter drive for the Vibratory Feeder
  • Motor starter for the Rotating Drum
  • Drives to be mounted in a NEMA 12 Enclosure and located in the power distribution area
  • Operator control station rated at NEMA 4 to be located outside near the machine
  • All wiring will be completed to a terminal strip for easy field installation
  • Electrical requirements: 460V, 3PH, 60Hz

Option II

Continuous Height Measurement with Limit Switch

  • High/Low limit switch fro metering drum
  • Encoder for continuous height measurement
  • Prewired to local terminal junction box
  • Wendt is responsible for all HMI/PLC programming
Metering Batch Feeder

Metering Batch Feeder

Metering Batch Feeder

Metering Batch Feeder

Metering Batch Feeder

Metering Batch Feeder

Batch Feeder

Batch Feeder

Back To Top